Orbeon Forms community mailing list

Separate portlet deploy - exclamation.png not showing for validation alerts

Classic

List

Threaded

14 messages Options

Stian Sigvartsen

Separate portlet deploy - exclamation.png not showing for validation alerts

Does anyone know if there is a known issue with exclamation.png not being available for <xforms:alert>?

I've set up some binds with required="true()" and when I leave the input boxes using these binds with no input and lose the focus, nothing changes visually. However, if I hover the mouse slightly to the right of the input box I get a tool tip which displays the alert's message.

Upon inspection it appears that a HTTP request is being made for this image, but it's not going through the OrbeonPortletXFormsFilter, instead looking for the image within my separately deployed webapp.

In contrast, the <xforms:help> works fine with an image displayed.
This image is being served through the OrbeonPortletXFormsFilter which is set up to filter <lifecycle>RESOURCE_PHASE</lifecycle>

I'm using a nightly build of Orbeon from 30/09/2010 and Liferay CE v6.0.5 .
Any guidance would be greatly appreciated, even if it is just a simple "no alerts exclamation marks display fine for me".

-Stian

--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws

Somya Rajesh Agarwal

(no subject)

Separate portlet deploy - exclamation.png not showing for validation alerts

Hi,

I have two nodes ‘endDate’ and ‘startDate’ within the nodeset ‘prescriptions’. Also I have an xforms:repeat control over the ‘prescriptions’ nodeset.

I want to ensure that “endDate >= startDate”. Both ‘endDate’ and ‘startDate’ are of type xs:date in the schema definition. I have used the following bind control.

<xforms:bind nodeset="/patientRecords/patient/visits/prescriptions/endDate"

constraint="/patientRecords/patient/visits/prescriptions/endDate >= /patientRecords/patient/visits/prescriptions/startDate" />

Now If all the repeating prescription nodesets violate this property then only the alert message is popped up. I want to implement this constraint individually on every repeating nodeset. Kindly suggest the right way to do it.

P.S. Please find attached the source code for reference.

Thanks and Regards,

Somya

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are not 
to copy, disclose, or distribute this e-mail or its contents to any other person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken 
every reasonable precaution to minimize this risk, but is not liable for any damage 
you may sustain as a result of any virus in this e-mail. You should carry out your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***

try-repeat-alert.jsp (16K) Download Attachment

register_xsd.jsp (1K) Download Attachment

Hasan

Re:

Somya,

You need to use index position of all the repeated elements.

Thanks and Regards,

Hasan Abbas
Sr. Software Engineer
Mob. No. 9911693379

InfoAxon Technologies                                                                                                                                                                               Limited InfoAxon Technologies UK Limited
H-189, Sector 63,                                                                                                                                                                                            Building A, Trinity Court,
NOIDA, U. P, India.                                                                                                                                                                                         Wokingham Road
 +91- 120- 4350040                                                                                                                                                                                          Bracknell, Berkshire RG42 1PL
FAX +91-120-4350065                                                                                                                                                                                     United Kingdom
Email: [hidden email]                                                                                                                                                                +44 1344 668048 | Fax: +44 1344 668148
Web URL: www.Infoaxon.com                                                                                                                                                                        DDI: +44 1344 668458

This email and any attachments are sent in confidence, subject to applicable legal privilege and upon the basis that the recipient will conduct appropriate virus checks. If you receive this email in error, please contact us upon receipt.
You are strictly prohibited from using, copying or disseminating it or any information contained in it save to the intended recipient. Internet communications are not secure and InfoAxon Technologies is not responsible for their abuse by third parties, nor for any alteration or corruption in transmission, nor for any damage or loss caused by any virus or other defect.

On 12/6/2010 1:11 PM, Somya Rajesh Agarwal wrote:

Separate portlet deploy - exclamation.png not showing for validation alerts

Hi,

I have two nodes ‘endDate’ and ‘startDate’ within the nodeset ‘prescriptions’. Also I have an xforms:repeat control over the ‘prescriptions’ nodeset.

I want to ensure that “endDate >= startDate”. Both ‘endDate’ and ‘startDate’ are of type xs:date in the schema definition. I have used the following bind control.

<xforms:bind nodeset="/patientRecords/patient/visits/prescriptions/endDate"

constraint="/patientRecords/patient/visits/prescriptions/endDate >= /patientRecords/patient/visits/prescriptions/startDate" />

Now If all the repeating prescription nodesets violate this property then only the alert message is popped up. I want to implement this constraint individually on every repeating nodeset. Kindly suggest the right way to do it.

P.S. Please find attached the source code for reference.

Thanks and Regards,

Somya
**************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***

Regards,
Hasan

Somya Rajesh Agarwal

RE: Re:

Separate portlet deploy - exclamation.png not showing for validation alerts

Hi Hasan,

Thanks for replying.

Can you please give an example illustrating the index position of the repeated elements.

Thanks and Regards,

Somya

From: Hasan Abbas [mailto:[hidden email]]
Sent: Monday, December 06, 2010 3:26 PM
To: [hidden email]
Subject: [ops-users] Re:

Somya,

You need to use index position of all the repeated elements.

Thanks and Regards,

Hasan Abbas
Sr. Software Engineer
Mob. No. 9911693379

InfoAxon Technologies                                                                                                                                                                               Limited InfoAxon Technologies UK Limited
H-189, Sector 63,                                                                                                                                                                                            Building A, Trinity Court,
NOIDA, U. P, India.                                                                                                                                                                                         Wokingham Road
( +91- 120- 4350040                                                                                                                                                                                          Bracknell, Berkshire RG42 1PL
FAX +91-120-4350065                                                                                                                                                                                     United Kingdom
Email: [hidden email] (                                                                                                                                                               +44 1344 668048 | Fax: +44 1344 668148
Web URL: www.Infoaxon.com                                                                                                                                                                        DDI: +44 1344 668458

On 12/6/2010 1:11 PM, Somya Rajesh Agarwal wrote:

Hi,

I have two nodes ‘endDate’ and ‘startDate’ within the nodeset ‘prescriptions’. Also I have an xforms:repeat control over the ‘prescriptions’ nodeset.

I want to ensure that “endDate >= startDate”. Both ‘endDate’ and ‘startDate’ are of type xs:date in the schema definition. I have used the following bind control.

<xforms:bind nodeset="/patientRecords/patient/visits/prescriptions/endDate"

constraint="/patientRecords/patient/visits/prescriptions/endDate >= /patientRecords/patient/visits/prescriptions/startDate" />

P.S. Please find attached the source code for reference.

Thanks and Regards,

Somya

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

Erik Bruchez

Re: Separate portlet deploy - exclamation.png not showing for validation alerts

Administrator

In reply to this post by Stian Sigvartsen

Stian,

We had a similar issue which was fixed on October 10, 2010:

https://github.com/orbeon/orbeon-forms/commit/bc5768cca3d25cfd114fcaefe6f0263b5e6ba453

With luck it's the same issue. Can you try a recent build?

-Erik

On Fri, Dec 3, 2010 at 2:46 AM, Stian Sigvartsen
<[hidden email]> wrote:

> Hi
>
> Does anyone know if there is a known issue with exclamation.png not being
> available for <xforms:alert>?
>
> I've set up some binds with required="true()" and when I leave the input
> boxes using these binds with no input and lose the focus, nothing changes
> visually. However, if I hover the mouse slightly to the right of the input
> box I get a tool tip which displays the alert's message.
>
> Upon inspection it appears that a HTTP request is being made for this image,
> but it's not going through the OrbeonPortletXFormsFilter, instead looking
> for the image within my separately deployed webapp.
>
> In contrast, the <xforms:help> works fine with an image displayed.
> This image is being served through the OrbeonPortletXFormsFilter which is
> set up to filter <lifecycle>RESOURCE_PHASE</lifecycle>
>
> I'm using a nightly build of Orbeon from 30/09/2010 and Liferay CE v6.0.5 .
> Any guidance would be greatly appreciated, even if it is just a simple "no
> alerts exclamation marks display fine for me".
>
> -Stian
>
> --
> You receive this message as a subscriber of the [hidden email] mailing
> list.
> To unsubscribe: mailto:[hidden email]
> For general help: mailto:[hidden email]?subject=help
> OW2 mailing lists service home page: http://www.ow2.org/wws
>
>

Tambet Matiisen

Re: RE: Re:

In reply to this post by Somya Rajesh Agarwal

Hi Somya!

I would use this:
<xforms:bind nodeset="patientRecords/patient/visits/prescriptions" constraint="startDate <= endDate"/>

See attached example.

Tambet

On 6.12.2010 12:19, Somya Rajesh Agarwal wrote:

Separate portlet deploy - exclamation.png not showing for validation alerts
Hi Hasan,

Thanks for replying.

Can you please give an example illustrating the index position of the repeated elements.

Thanks and Regards,

Somya

From: Hasan Abbas [[hidden email]]
Sent: Monday, December 06, 2010 3:26 PM
To: [hidden email]
Subject: [ops-users] Re:

Somya,

You need to use index position of all the repeated elements.

Thanks and Regards,

Hasan Abbas
Sr. Software Engineer
Mob. No. 9911693379

InfoAxon Technologies                                                                                                                                                                               Limited InfoAxon Technologies UK Limited
H-189, Sector 63,                                                                                                                                                                                            Building A, Trinity Court,
NOIDA, U. P, India.                                                                                                                                                                                         Wokingham Road
( +91- 120- 4350040                                                                                                                                                                                          Bracknell, Berkshire RG42 1PL
FAX +91-120-4350065                                                                                                                                                                                     United Kingdom
Email: [hidden email] (                                                                                                                                                               +44 1344 668048 | Fax: +44 1344 668148
Web URL: www.Infoaxon.com                                                                                                                                                                        DDI: +44 1344 668458

This email and any attachments are sent in confidence, subject to applicable legal privilege and upon the basis that the recipient will conduct appropriate virus checks. If you receive this email in error, please contact us upon receipt.
You are strictly prohibited from using, copying or disseminating it or any information contained in it save to the intended recipient. Internet communications are not secure and InfoAxon Technologies is not responsible for their abuse by third parties, nor for any alteration or corruption in transmission, nor for any damage or loss caused by any virus or other defect.

On 12/6/2010 1:11 PM, Somya Rajesh Agarwal wrote:

Hi,

I have two nodes ‘endDate’ and ‘startDate’ within the nodeset ‘prescriptions’. Also I have an xforms:repeat control over the ‘prescriptions’ nodeset.

I want to ensure that “endDate >= startDate”. Both ‘endDate’ and ‘startDate’ are of type xs:date in the schema definition. I have used the following bind control.

<xforms:bind nodeset="/patientRecords/patient/visits/prescriptions/endDate"

     constraint="/patientRecords/patient/visits/prescriptions/endDate >= /patientRecords/patient/visits/prescriptions/startDate" />

Now If all the repeating prescription nodesets violate this property then only the alert message is popped up. I want to implement this constraint individually on every repeating nodeset. Kindly suggest the right way to do it.

P.S. Please find attached the source code for reference.

Thanks and Regards,

Somya
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are not 
to copy, disclose, or distribute this e-mail or its contents to any other person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken 
every reasonable precaution to minimize this risk, but is not liable for any damage 
you may sustain as a result of any virus in this e-mail. You should carry out your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***

somya.xhtml (3K) Download Attachment

Somya Rajesh Agarwal

Linking to external XML Schema

Separate portlet deploy - exclamation.png not showing for validation alerts

Hi All,

I have built my xforms into the jsp page. Now, am trying to link it to the external schema as below.

<xforms:model schema=”/xforms-jsp/store-patient-data/NewXMLSchema.xsd”>

Both the container jsp page and the schema file are placed inside the directory “/xforms-jsp/store-patient-data/” in the orbeon directory structure.

However “premature end of file” error is reported when I try to load the jsp page. How shall I link the external schema?

Thanks and Regards,

Somya

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are not 
to copy, disclose, or distribute this e-mail or its contents to any other person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken 
every reasonable precaution to minimize this risk, but is not liable for any damage 
you may sustain as a result of any virus in this e-mail. You should carry out your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***

Erik Bruchez

Re: Linking to external XML Schema

Administrator

Somya,

I tried this and it seems to work for me, e.g.:

<xforms:model schema="/xforms-jsp/schema.xsd">

The "premature end of file" error definitely occurs when the file cannot be read.

Do you see the full URL logged in the error page?

-Erik

On Mon, Dec 13, 2010 at 1:27 AM, Somya Rajesh Agarwal <[hidden email]> wrote:

Hi All,

I have built my xforms into the jsp page. Now, am trying to link it to the external schema as below.

<xforms:model schema=”/xforms-jsp/store-patient-data/NewXMLSchema.xsd”>

Both the container jsp page and the schema file are placed inside the directory “/xforms-jsp/store-patient-data/” in the orbeon directory structure.

However “premature end of file” error is reported when I try to load the jsp page. How shall I link the external schema?

Thanks and Regards,
Somya
**************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***
--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws

Somya Rajesh Agarwal

RE: Re: Linking to external XML Schema

Hi Erik,

I tried but still same error is coming.

Please find attached the full error log from the orbeon.

I appreciate your help on this.

Thanks and Regards,

Somya

From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
Sent: Saturday, December 18, 2010 7:38 AM
To: [hidden email]
Subject: [ops-users] Re: Linking to external XML Schema

Somya,

I tried this and it seems to work for me, e.g.:

<xforms:model schema="/xforms-jsp/schema.xsd">

The "premature end of file" error definitely occurs when the file cannot be read.

Do you see the full URL logged in the error page?

-Erik

On Mon, Dec 13, 2010 at 1:27 AM, Somya Rajesh Agarwal <[hidden email]> wrote:

Hi All,

I have built my xforms into the jsp page. Now, am trying to link it to the external schema as below.

<xforms:model schema=”/xforms-jsp/store-patient-data/NewXMLSchema.xsd”>

Both the container jsp page and the schema file are placed inside the directory “/xforms-jsp/store-patient-data/” in the orbeon directory structure.

However “premature end of file” error is reported when I try to load the jsp page. How shall I link the external schema?

Thanks and Regards,

Somya

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

error report.doc (431K) Download Attachment

Erik Bruchez

Re: RE: Re: Linking to external XML Schema

Administrator

What happens if you try, from your browser, to read the URL shown in the page:

http://localhost:8080/orbeon/xforms-jsp/store-patient-data/schema.xsd

-Erik

On Sun, Dec 19, 2010 at 9:03 PM, Somya Rajesh Agarwal <[hidden email]> wrote:

Hi Erik,

I tried but still same error is coming.
Please find attached the full error log from the orbeon.

I appreciate your help on this.

Thanks and Regards,
Somya

From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
Sent: Saturday, December 18, 2010 7:38 AM
To: [hidden email]
Subject: [ops-users] Re: Linking to external XML Schema
Somya,

I tried this and it seems to work for me, e.g.:

<xforms:model schema="/xforms-jsp/schema.xsd">

The "premature end of file" error definitely occurs when the file cannot be read.

Do you see the full URL logged in the error page?
-Erik
On Mon, Dec 13, 2010 at 1:27 AM, Somya Rajesh Agarwal <[hidden email]> wrote:
Hi All,

I have built my xforms into the jsp page. Now, am trying to link it to the external schema as below.

<xforms:model schema=”/xforms-jsp/store-patient-data/NewXMLSchema.xsd”>

Both the container jsp page and the schema file are placed inside the directory “/xforms-jsp/store-patient-data/” in the orbeon directory structure.

However “premature end of file” error is reported when I try to load the jsp page. How shall I link the external schema?

Thanks and Regards,
Somya
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are not 
to copy, disclose, or distribute this e-mail or its contents to any other person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken 
every reasonable precaution to minimize this risk, but is not liable for any damage 
you may sustain as a result of any virus in this e-mail. You should carry out your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws
--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws

Somya Rajesh Agarwal

RE: Re: RE: Re: Linking to external XML Schema

If I try to load http://localhost:8080/orbeon/xforms-jsp/store-patient-data/schema.xsd in my browser the blank page appears.

There is neither any error nor any output.

Regards,

Somya

From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
Sent: Tuesday, December 21, 2010 7:04 AM
To: [hidden email]
Subject: [ops-users] Re: RE: Re: Linking to external XML Schema

What happens if you try, from your browser, to read the URL shown in the page:

http://localhost:8080/orbeon/xforms-jsp/store-patient-data/schema.xsd

-Erik

On Sun, Dec 19, 2010 at 9:03 PM, Somya Rajesh Agarwal <[hidden email]> wrote:

Hi Erik,

I tried but still same error is coming.

Please find attached the full error log from the orbeon.

I appreciate your help on this.

Thanks and Regards,

Somya

Somya,

I tried this and it seems to work for me, e.g.:

<xforms:model schema="/xforms-jsp/schema.xsd">

The "premature end of file" error definitely occurs when the file cannot be read.

Do you see the full URL logged in the error page?

-Erik

On Mon, Dec 13, 2010 at 1:27 AM, Somya Rajesh Agarwal <[hidden email]> wrote:

Hi All,

I have built my xforms into the jsp page. Now, am trying to link it to the external schema as below.

<xforms:model schema=”/xforms-jsp/store-patient-data/NewXMLSchema.xsd”>

Both the container jsp page and the schema file are placed inside the directory “/xforms-jsp/store-patient-data/” in the orbeon directory structure.

However “premature end of file” error is reported when I try to load the jsp page. How shall I link the external schema?

Thanks and Regards,

Somya

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

Erik Bruchez

Re: RE: Re: RE: Re: Linking to external XML Schema

Administrator

If you do a browser view source on this page, do you see the contents of the XSD file? In my case I do!

-Erik

On Mon, Dec 20, 2010 at 8:19 PM, Somya Rajesh Agarwal <[hidden email]> wrote:

If I try to load http://localhost:8080/orbeon/xforms-jsp/store-patient-data/schema.xsd in my browser the blank page appears.

There is neither any error nor any output.

Regards,

Somya

From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
Sent: Tuesday, December 21, 2010 7:04 AM

To: [hidden email]
Subject: [ops-users] Re: RE: Re: Linking to external XML Schema
What happens if you try, from your browser, to read the URL shown in the page:

http://localhost:8080/orbeon/xforms-jsp/store-patient-data/schema.xsd
-Erik
On Sun, Dec 19, 2010 at 9:03 PM, Somya Rajesh Agarwal <[hidden email]> wrote:
Hi Erik,
I tried but still same error is coming.
Please find attached the full error log from the orbeon.

I appreciate your help on this.

Thanks and Regards,
Somya

From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
Sent: Saturday, December 18, 2010 7:38 AM
To: [hidden email]
Subject: [ops-users] Re: Linking to external XML Schema
Somya,

I tried this and it seems to work for me, e.g.:

<xforms:model schema="/xforms-jsp/schema.xsd">

The "premature end of file" error definitely occurs when the file cannot be read.

Do you see the full URL logged in the error page?
-Erik
On Mon, Dec 13, 2010 at 1:27 AM, Somya Rajesh Agarwal <[hidden email]> wrote:
Hi All,

I have built my xforms into the jsp page. Now, am trying to link it to the external schema as below.

<xforms:model schema=”/xforms-jsp/store-patient-data/NewXMLSchema.xsd”>

Both the container jsp page and the schema file are placed inside the directory “/xforms-jsp/store-patient-data/” in the orbeon directory structure.

However “premature end of file” error is reported when I try to load the jsp page. How shall I link the external schema?

Thanks and Regards,
Somya
**************** CAUTION - Disclaimer *****************
 
 
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are not 
to copy, disclose, or distribute this e-mail or its contents to any other person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken 
every reasonable precaution to minimize this risk, but is not liable for any damage 
you may sustain as a result of any virus in this e-mail. You should carry out your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws
--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws
--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws

Somya Rajesh Agarwal

RE: Re: RE: Re: RE: Re: Linking to external XML Schema

No. There is no content appearing when I load my xsd file using browser.

Please find attached my xsd file.

Regards,

Somya

From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
Sent: Wednesday, December 22, 2010 7:46 AM
To: [hidden email]
Subject: [ops-users] Re: RE: Re: RE: Re: Linking to external XML Schema

If you do a browser view source on this page, do you see the contents of the XSD file? In my case I do!

-Erik

On Mon, Dec 20, 2010 at 8:19 PM, Somya Rajesh Agarwal <[hidden email]> wrote:

If I try to load http://localhost:8080/orbeon/xforms-jsp/store-patient-data/schema.xsd in my browser the blank page appears.

There is neither any error nor any output.

Regards,

Somya

From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
Sent: Tuesday, December 21, 2010 7:04 AM

To: [hidden email]

Subject: [ops-users] Re: RE: Re: Linking to external XML Schema

What happens if you try, from your browser, to read the URL shown in the page:

http://localhost:8080/orbeon/xforms-jsp/store-patient-data/schema.xsd

-Erik

On Sun, Dec 19, 2010 at 9:03 PM, Somya Rajesh Agarwal <[hidden email]> wrote:

Hi Erik,

I tried but still same error is coming.

Please find attached the full error log from the orbeon.

I appreciate your help on this.

Thanks and Regards,

Somya

Somya,

I tried this and it seems to work for me, e.g.:

<xforms:model schema="/xforms-jsp/schema.xsd">

The "premature end of file" error definitely occurs when the file cannot be read.

Do you see the full URL logged in the error page?

-Erik

On Mon, Dec 13, 2010 at 1:27 AM, Somya Rajesh Agarwal <[hidden email]> wrote:

Hi All,

I have built my xforms into the jsp page. Now, am trying to link it to the external schema as below.

<xforms:model schema=”/xforms-jsp/store-patient-data/NewXMLSchema.xsd”>

Both the container jsp page and the schema file are placed inside the directory “/xforms-jsp/store-patient-data/” in the orbeon directory structure.

However “premature end of file” error is reported when I try to load the jsp page. How shall I link the external schema?

Thanks and Regards,

Somya

**************** CAUTION - Disclaimer *****************

This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient, please

notify the sender by e-mail and delete the original message. Further, you are not

to copy, disclose, or distribute this e-mail or its contents to any other person and

any such actions are unlawful. This e-mail may contain viruses. Infosys has taken

every reasonable precaution to minimize this risk, but is not liable for any damage

you may sustain as a result of any virus in this e-mail. You should carry out your

own virus checks before opening the e-mail or attachment. Infosys reserves the

right to monitor and review the content of all messages sent to or from this e-mail

address. Messages sent to or from this e-mail address may be stored on the

Infosys e-mail system.

***INFOSYS******** End of Disclaimer ********INFOSYS***

schema.xsd (13K) Download Attachment

Erik Bruchez

Re: RE: Re: RE: Re: RE: Re: Linking to external XML Schema

Administrator

Not sure what's going on. Try putting the schema in a location that does not go through the XForms filter. In your case, outside of /xforms-jsp.

-Erik

On Tue, Dec 21, 2010 at 8:31 PM, Somya Rajesh Agarwal <[hidden email]> wrote:

No. There is no content appearing when I load my xsd file using browser.

Please find attached my xsd file.

Regards,
Somya

From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
Sent: Wednesday, December 22, 2010 7:46 AM

To: [hidden email]
Subject: [ops-users] Re: RE: Re: RE: Re: Linking to external XML Schema
If you do a browser view source on this page, do you see the contents of the XSD file? In my case I do!
-Erik
On Mon, Dec 20, 2010 at 8:19 PM, Somya Rajesh Agarwal <[hidden email]> wrote:
If I try to load http://localhost:8080/orbeon/xforms-jsp/store-patient-data/schema.xsd in my browser the blank page appears.

There is neither any error nor any output.

Regards,

Somya

From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
Sent: Tuesday, December 21, 2010 7:04 AM

To: [hidden email]
Subject: [ops-users] Re: RE: Re: Linking to external XML Schema
What happens if you try, from your browser, to read the URL shown in the page:

http://localhost:8080/orbeon/xforms-jsp/store-patient-data/schema.xsd
-Erik
On Sun, Dec 19, 2010 at 9:03 PM, Somya Rajesh Agarwal <[hidden email]> wrote:
Hi Erik,
I tried but still same error is coming.
Please find attached the full error log from the orbeon.

I appreciate your help on this.

Thanks and Regards,
Somya

From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
Sent: Saturday, December 18, 2010 7:38 AM
To: [hidden email]
Subject: [ops-users] Re: Linking to external XML Schema
Somya,

I tried this and it seems to work for me, e.g.:

<xforms:model schema="/xforms-jsp/schema.xsd">

The "premature end of file" error definitely occurs when the file cannot be read.

Do you see the full URL logged in the error page?
-Erik
On Mon, Dec 13, 2010 at 1:27 AM, Somya Rajesh Agarwal <[hidden email]> wrote:
Hi All,

I have built my xforms into the jsp page. Now, am trying to link it to the external schema as below.

<xforms:model schema=”/xforms-jsp/store-patient-data/NewXMLSchema.xsd”>

Both the container jsp page and the schema file are placed inside the directory “/xforms-jsp/store-patient-data/” in the orbeon directory structure.

However “premature end of file” error is reported when I try to load the jsp page. How shall I link the external schema?

Thanks and Regards,
Somya
**************** CAUTION - Disclaimer *****************
 
 
 
 
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are not 
to copy, disclose, or distribute this e-mail or its contents to any other person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken 
every reasonable precaution to minimize this risk, but is not liable for any damage 
you may sustain as a result of any virus in this e-mail. You should carry out your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws
--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws
--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws
--
You receive this message as a subscriber of the [hidden email] mailing list.
To unsubscribe: mailto:[hidden email]
For general help: mailto:[hidden email]?subject=help
OW2 mailing lists service home page: http://www.ow2.org/wws