No autosaves occuring while actively editing a form

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

No autosaves occuring while actively editing a form

bwallis42
I have a test case form with 20 text fields and I have the autosave timeout
set to 5 seconds.

If I enter text into a field and tab to the next and enter text and so on
over a period of time much longer than 5 seconds no drafts get saved, I
don't get a draft saved until I pause typing and tabbing between fields for
longer than 5 seconds.

Is the expected behaviour?

In a customer's case where the autosave timeout is set to 60 seconds it is
quite possible for someone to be entering data into a reasonably complex
form for 10 minutes or more without any drafts being saved. This is not what
the user would expect. They will lose all their entered data if the system
goes down during that time.

This might be something we have configured wrong but I can't see what. (I
don't have incremental set on the form fields).

thanks
brian...


--
Sent from: http://discuss.orbeon.com/

--
You received this message because you are subscribed to the Google Groups "Orbeon Forms" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/orbeon/1569920159110-0.post%40n4.nabble.com.
Reply | Threaded
Open this post in threaded view
|

Re: No autosaves occuring while actively editing a form

bwallis42
Hi Alex or Eric,
  I was wondering if you could comment on this and clarify when an autosave
occurs. Our observed behaviour is problematic as it requires the user to be
idle for a period of time before an autosave occurs.

thanks,
brian...


--
Sent from: http://discuss.orbeon.com/

--
You received this message because you are subscribed to the Google Groups "Orbeon Forms" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/orbeon/1570420562292-0.post%40n4.nabble.com.
Reply | Threaded
Open this post in threaded view
|

Re: No autosaves occuring while actively editing a form

Alessandro  Vernet
Administrator
In reply to this post by bwallis42
Hi Brian,

You're right, and this indeed isn't what I would expect either. Luckily, it
doesn't seem to be too hard to change this, however it needs to be done with
some care! So, for now, I've created the issue below, and am hoping that we
can fix this for 2019.1. And thank you for letting us know about this one!

https://github.com/orbeon/orbeon-forms/issues/4205

‑Alex

-----
--
Follow Orbeon on Twitter: @orbeon
Follow me on Twitter: @avernet
--
Sent from: http://discuss.orbeon.com/

--
You received this message because you are subscribed to the Google Groups "Orbeon Forms" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/orbeon/1570570283851-0.post%40n4.nabble.com.
--
Follow Orbeon on Twitter: @orbeon
Follow me on Twitter: @avernet
Reply | Threaded
Open this post in threaded view
|

Re: No autosaves occuring while actively editing a form

bwallis42
Thanks Alex.


--
Sent from: http://discuss.orbeon.com/

--
You received this message because you are subscribed to the Google Groups "Orbeon Forms" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/orbeon/1570577458003-0.post%40n4.nabble.com.
Reply | Threaded
Open this post in threaded view
|

Re: No autosaves occuring while actively editing a form

bwallis42
Hi Alex,
  We have been discussing this internally and the conclusion is that we
really need to have this fixed as the current behaviour is a serious concern
to our customer. Our only workaround is to set the auto save timeout to a
quite low value (sub 10 seconds) and I have concerns about the impact this
might have on performance.

So, Is this likely to make it into the 2019.1 release and when are you
expecting this release to come out? There are quite a few things in the
upcoming release that we would like to use.

thanks,
brian...


--
Sent from: http://discuss.orbeon.com/

--
You received this message because you are subscribed to the Google Groups "Orbeon Forms" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/orbeon/1570583031297-0.post%40n4.nabble.com.
Reply | Threaded
Open this post in threaded view
|

Re: No autosaves occuring while actively editing a form

Alessandro  Vernet
Administrator
Hi Brian,

This is now fixed and will be in 2019.1. Would you be able to upgrade, or
would you prefer to have this on a 2018.2.4? And of course, just let me know
if you'd like a test build to check that this works as expected.

‑Alex

-----
--
Follow Orbeon on Twitter: @orbeon
Follow me on Twitter: @avernet
--
Sent from: http://discuss.orbeon.com/

--
You received this message because you are subscribed to the Google Groups "Orbeon Forms" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/orbeon/1570662353204-0.post%40n4.nabble.com.
--
Follow Orbeon on Twitter: @orbeon
Follow me on Twitter: @avernet
Reply | Threaded
Open this post in threaded view
|

Re: No autosaves occuring while actively editing a form

Jarosław Kowalewski
Hi Alex,
It would be great to have this fix in 2018.2.4 to simplify the process of upgrade. 

//Jarek

czw., 10 paź 2019 o 01:05 Alessandro Vernet <[hidden email]> napisał(a):
Hi Brian,

This is now fixed and will be in 2019.1. Would you be able to upgrade, or
would you prefer to have this on a 2018.2.4? And of course, just let me know
if you'd like a test build to check that this works as expected.

‑Alex

-----
--
Follow Orbeon on Twitter: @orbeon
Follow me on Twitter: @avernet
--
Sent from: http://discuss.orbeon.com/

--
You received this message because you are subscribed to the Google Groups "Orbeon Forms" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/orbeon/1570662353204-0.post%40n4.nabble.com.

--
You received this message because you are subscribed to the Google Groups "Orbeon Forms" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/orbeon/CAHFpwcWPBoXqLue%2BTc8q3gT8zcoiwo2%3DQSmt9Ca6ykp_mYDSsw%40mail.gmail.com.
Reply | Threaded
Open this post in threaded view
|

Re: No autosaves occuring while actively editing a form

Alessandro  Vernet
Administrator
Hi Jarek,

Makes sense: we cherry-picked the fix on the `2018.2-pe` branch, so it will
be included in the 2018.2.4 release.

‑Alex

-----
--
Follow Orbeon on Twitter: @orbeon
Follow me on Twitter: @avernet
--
Sent from: http://discuss.orbeon.com/

--
You received this message because you are subscribed to the Google Groups "Orbeon Forms" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/orbeon/1570836501249-0.post%40n4.nabble.com.
--
Follow Orbeon on Twitter: @orbeon
Follow me on Twitter: @avernet