Basic output of instance doc?
Locked
 
|
I'm migrating a simple XForm from Firefox+XForm to Orbeon and I'm having a little trouble getting to my basic instance document when submitting the form. I'm using the following submission code:
<xforms:submission action="file:///tmp/mods_orbeon.xml" method="put" id="submit" replace="none"/> <xforms:submit submission="submit"> <xforms:label>Write to disk</xforms:label> </xforms:submit> At this stage of development I would like to keep things as simple as possible, realizing that later I may use eXist or some server-side processing to handle the form submission. I scoured the documentation but I seem to be overlooking how I might produce a simple screen-readable version of the instance document. Can someone advise me on this? Thank you. Duane Gran -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
Re: Basic output of instance doc?
|
Administrator
|
Duane,
You cannot use the "file:" scheme for XForms submission with Orbeon PresentationServer. Currently, only the "http:" and "https:" schemes are supported. Even if emplemented, this would probably not have the effect you are looking for, since the submission would happen on your server, and not on your client as you may exepct. As we discussed earlier in this mailing-list, submitting on the client (or even reading from it) is prevented by your browser's security policies. The easiest thing to do is to setup a simple service, with OPS or otherwise, which is able to receive and display the result of your submission with a POST. This is in fact almost trivial with OPS: setup a page matchint the URL of your submission, and use either a model or action pipeline to read its "instance" input and save it on disk with the File serializer. -Erik [hidden email] wrote: > I'm migrating a simple XForm from Firefox+XForm to Orbeon and I'm > having a little trouble getting to my basic instance document when > submitting the form. I'm using the following submission code: > > <xforms:submission action="file:///tmp/mods_orbeon.xml" method="put" id="submit" > replace="none"/> > > <xforms:submit submission="submit"> > <xforms:label>Write to disk</xforms:label> > </xforms:submit> > > At this stage of development I would like to keep things as simple > as possible, realizing that later I may use eXist or some > server-side processing to handle the form submission. I scoured the > documentation but I seem to be overlooking how I might produce a > simple screen-readable version of the instance document. Can > someone advise me on this? Thank you. > > Duane Gran -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
Re: Re: Basic output of instance doc?
|
|
>The easiest thing to do is to setup a simple service, with OPS or
>otherwise, which is able to receive and display the result of your >submission with a POST. This is in fact almost trivial with OPS: setup >a page matchint the URL of your submission, and use either a model or >action pipeline to read its "instance" input and save it on disk with >the File serializer. Thank you for the explanation. Can you tell me if there is a good example to follow for this? I'm pouring over the tutorial and the samples, but I'm having a hard time pairing your advice with proper syntax. Duane -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
|
|
On Nov 29, 2005, at 4:24 PM, [hidden email] wrote: >> The easiest thing to do is to setup a simple service, with OPS or >> otherwise, which is able to receive and display the result of your >> submission with a POST. This is in fact almost trivial with OPS: >> setup >> a page matchint the URL of your submission, and use either a model or >> action pipeline to read its "instance" input and save it on disk with >> the File serializer. > > Thank you for the explanation. Can you tell me if there is a good > example to follow for this? I'm pouring over the tutorial and the > samples, but I'm having a hard time pairing your advice with proper > syntax. > your answer but I must be overlooking something. I have two pages, one for data entry and the other for results. Eventually I want the results page to display the instance document, but in the meantime writing to the filesystem is a good start. Below is my page flow: <page id="initial_form" path-info="/xforms-mods" view="mods- editor-view.xml"/> <page id="results" path-info="/xforms-mods/results" model="model.xpl" view="mods-results-view.xml"/> And here is the model (model.xpl) for the second page (results), which should create the file, but doesn't: <p:config xmlns:p="http://www.orbeon.com/oxf/pipeline" xmlns:oxf="http://www.orbeon.com/oxf/processors"> <p:processor name="oxf:file-serializer"> <p:input name="config"> <config> <file>mods-result.xml</file> <directory>/tmp</directory> </config> </p:input> <p:input name="data" href="#instance"/> </p:processor> </p:config> Any ideas why this may be happening? I'm at a loss and appreciate any suggestions on this. Duane -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
Re: Basic output of instance doc?
|
Administrator
|
Duane Gran wrote:
> Upon further reflection, I believe I may be closer to understanding > your answer but I must be overlooking something. I have two pages, > one for data entry and the other for results. Eventually I want the > results page to display the instance document, but in the meantime > writing to the filesystem is a good start. Below is my page flow: > > <page id="initial_form" path-info="/xforms-mods" view="mods- > editor-view.xml"/> > <page id="results" path-info="/xforms-mods/results" > model="model.xpl" view="mods-results-view.xml"/> > > And here is the model (model.xpl) for the second page (results), which > should create the file, but doesn't: > > <p:config xmlns:p="http://www.orbeon.com/oxf/pipeline" > xmlns:oxf="http://www.orbeon.com/oxf/processors"> > <p:processor name="oxf:file-serializer"> > > <p:input name="config"> > <config> > <file>mods-result.xml</file> > <directory>/tmp</directory> > </config> > </p:input> > <p:input name="data" href="#instance"/> > </p:processor> > </p:config> > > Any ideas why this may be happening? I'm at a loss and appreciate any > suggestions on this. Your pipeline does not declare an "instance" parameter. Then you also need an oxf:xml-converter processor before the oxf:file-serializer. <p:config xmlns:p="http://www.orbeon.com/oxf/pipeline" xmlns:oxf="http://www.orbeon.com/oxf/processors"> <p:param name="instance" type="input"/> <p:processor name="oxf:xml-converter"> <p:input name="config"> <config/> </p:input> <p:input name="data" href="#instance"/> <p:output name="data" id="converted"/> </p:processor> <p:processor name="oxf:file-serializer"> <p:input name="config"> <config> <file>mods-result.xml</file> <directory>/tmp</directory> </config> </p:input> <p:input name="data" href="#converter"/> </p:processor> </p:config> Be also sure to check in the logs that your submission in fact is calling /xforms-mods/results. If it is not, you will have to check your xforms:submission element. Also remember that a submission will work only if the instance is valid and if required values are not empty. Otherwise, an xforms-submit-error event is thrown. -Erik -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
|
|
Erik,
Thank you for the suggestion below. I corrected a typo near the bottom (converted, rather than converter) and it works, however the output appears to have some entities inserted in place of angle brackets for the elements. It is easier for me to paste a little bit of the output than to explain: <?xml version="1.0" encoding="utf-8"?> <document xsi:type="xs:string" content-type="application/xml; charset=utf-8"><?xml version="1.0" encoding="utf-8"?> <form xmlns:xhtml="http://www.w3.org/1999/xhtml" xmlns:oxf="http:// www.orbeon.com/oxf/processors" xmlns:xi="http://www.w3.org/2003/ XInclude" xmlns:xxforms="http://orbeon.org/oxf/xml/xforms" xmlns:context="java:org.orbeon.oxf.pipeline.StaticExternalContext" xmlns:f="http://orbeon.org/oxf/xml/formatting" xmlns:p="http:// www.orbeon.com/oxf/pipeline" xmlns:ev="http://www.w3.org/2001/xml- events" xmlns:xforms="http://www.w3.org/2002/xforms"> <action/> <show- details>true</show-details> <view>form</view> <global- validation/> <mods xml:base="oxf:/examples/xforms/xforms-mods/mods_v3-1_instance.xml"> <titleInfo> Immediately I notice two xml declarations at the top of the file, but I'm not sure why this is happening. Any ideas on what is happening here? Duane > > Any ideas why this may be happening? I'm at a loss and > appreciate any > > suggestions on this. > > Your pipeline does not declare an "instance" parameter. Then you also > need an oxf:xml-converter processor before the oxf:file-serializer. > > <p:config xmlns:p="http://www.orbeon.com/oxf/pipeline" > xmlns:oxf="http://www.orbeon.com/oxf/processors"> > > <p:param name="instance" type="input"/> > > <p:processor name="oxf:xml-converter"> > <p:input name="config"> > <config/> > </p:input> > <p:input name="data" href="#instance"/> > <p:output name="data" id="converted"/> > </p:processor> > > <p:processor name="oxf:file-serializer"> > <p:input name="config"> > <config> > <file>mods-result.xml</file> > <directory>/tmp</directory> > </config> > </p:input> > <p:input name="data" href="#converter"/> > </p:processor> > </p:config> > > Be also sure to check in the logs that your submission in fact is > calling /xforms-mods/results. If it is not, you will have to check > your xforms:submission element. Also remember that a submission will > work only if the instance is valid and if required values are not > empty. Otherwise, an xforms-submit-error event is thrown. > > -Erik > > > > -- > You receive this message as a subscriber of the ops- > [hidden email] mailing list. > To unsubscribe: mailto:[hidden email] > For general help: mailto:[hidden email]?subject=help > ObjectWeb mailing lists service home page: http://www.objectweb.org/ > wws -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
|
|
Erik (and others),
I don't want to lean on the list too much, but I have a related problem that is puzzling me. OPS doesn't reliably produce the output file (/tmp/mods-result.xml) and I can't figure out why sometimes it works and other times it doesn't. I've tried restarting Tomcat, but to no avail. My form is simple with no bindings, so I don't believe there could be any xforms-submit-error event. Can anyone suggest a reason for why the file is created intermittently or how I might debug this? Duane On Nov 30, 2005, at 10:03 AM, Duane Gran wrote: > Erik, > > Thank you for the suggestion below. I corrected a typo near the > bottom (converted, rather than converter) and it works, however the > output appears to have some entities inserted in place of angle > brackets for the elements. It is easier for me to paste a little > bit of the output than to explain: > > <?xml version="1.0" encoding="utf-8"?> > <document xsi:type="xs:string" content-type="application/xml; > charset=utf-8"><?xml version="1.0" encoding="utf-8"?> > <form xmlns:xhtml="http://www.w3.org/1999/xhtml" > xmlns:oxf="http://www.orbeon.com/oxf/processors" xmlns:xi="http:// > www.w3.org/2003/XInclude" xmlns:xxforms="http://orbeon.org/oxf/xml/ > xforms" > xmlns:context="java:org.orbeon.oxf.pipeline.StaticExternalContext" > xmlns:f="http://orbeon.org/oxf/xml/formatting" xmlns:p="http:// > www.orbeon.com/oxf/pipeline" xmlns:ev="http://www.w3.org/2001/xml- > events" xmlns:xforms="http://www.w3.org/2002/xforms"> > <action/> > <show- > details>true</show-details> > > <view>form</view> > <global- > validation/> > <mods > xml:base="oxf:/examples/xforms/xforms-mods/mods_v3-1_instance.xml"> > > <titleInfo> > > Immediately I notice two xml declarations at the top of the file, > but I'm not sure why this is happening. Any ideas on what is > happening here? > > Duane > >> > Any ideas why this may be happening? I'm at a loss and >> appreciate any >> > suggestions on this. >> >> Your pipeline does not declare an "instance" parameter. Then you also >> need an oxf:xml-converter processor before the oxf:file-serializer. >> >> <p:config xmlns:p="http://www.orbeon.com/oxf/pipeline" >> xmlns:oxf="http://www.orbeon.com/oxf/processors"> >> >> <p:param name="instance" type="input"/> >> >> <p:processor name="oxf:xml-converter"> >> <p:input name="config"> >> <config/> >> </p:input> >> <p:input name="data" href="#instance"/> >> <p:output name="data" id="converted"/> >> </p:processor> >> >> <p:processor name="oxf:file-serializer"> >> <p:input name="config"> >> <config> >> <file>mods-result.xml</file> >> <directory>/tmp</directory> >> </config> >> </p:input> >> <p:input name="data" href="#converter"/> >> </p:processor> >> </p:config> >> >> Be also sure to check in the logs that your submission in fact is >> calling /xforms-mods/results. If it is not, you will have to check >> your xforms:submission element. Also remember that a submission will >> work only if the instance is valid and if required values are not >> empty. Otherwise, an xforms-submit-error event is thrown. >> >> -Erik >> >> >> >> -- >> You receive this message as a subscriber of the ops- >> [hidden email] mailing list. >> To unsubscribe: mailto:[hidden email] >> For general help: mailto:[hidden email]?subject=help >> ObjectWeb mailing lists service home page: http:// >> www.objectweb.org/wws > -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
Re: Basic output of instance doc?
|
Administrator
|
In reply to this post by Duane Gran
Duane,
This could have happened with older versions of OPS, but not with recent ones, although I can't right now tell you exactly at what point the change was made. When version are you using? -Erik Duane Gran wrote: > Erik, > > Thank you for the suggestion below. I corrected a typo near the bottom > (converted, rather than converter) and it works, however the output > appears to have some entities inserted in place of angle brackets for > the elements. It is easier for me to paste a little bit of the output > than to explain: > > <?xml version="1.0" encoding="utf-8"?> > <document xsi:type="xs:string" content-type="application/xml; > charset=utf-8"><?xml version="1.0" encoding="utf-8"?> > <form xmlns:xhtml="http://www.w3.org/1999/xhtml" xmlns:oxf="http:// > www.orbeon.com/oxf/processors" xmlns:xi="http://www.w3.org/2003/ > XInclude" xmlns:xxforms="http://orbeon.org/oxf/xml/xforms" > xmlns:context="java:org.orbeon.oxf.pipeline.StaticExternalContext" > xmlns:f="http://orbeon.org/oxf/xml/formatting" xmlns:p="http:// > www.orbeon.com/oxf/pipeline" xmlns:ev="http://www.w3.org/2001/xml- > events" xmlns:xforms="http://www.w3.org/2002/xforms"> > <action/> > <show- > details>true</show-details> > > <view>form</view> > <global- > validation/> > <mods > xml:base="oxf:/examples/xforms/xforms-mods/mods_v3-1_instance.xml"> > > <titleInfo> > > Immediately I notice two xml declarations at the top of the file, but > I'm not sure why this is happening. Any ideas on what is happening here? > > Duane > >> > Any ideas why this may be happening? I'm at a loss and appreciate >> any >> > suggestions on this. >> >> Your pipeline does not declare an "instance" parameter. Then you also >> need an oxf:xml-converter processor before the oxf:file-serializer. >> >> <p:config xmlns:p="http://www.orbeon.com/oxf/pipeline" >> xmlns:oxf="http://www.orbeon.com/oxf/processors"> >> >> <p:param name="instance" type="input"/> >> >> <p:processor name="oxf:xml-converter"> >> <p:input name="config"> >> <config/> >> </p:input> >> <p:input name="data" href="#instance"/> >> <p:output name="data" id="converted"/> >> </p:processor> >> >> <p:processor name="oxf:file-serializer"> >> <p:input name="config"> >> <config> >> <file>mods-result.xml</file> >> <directory>/tmp</directory> >> </config> >> </p:input> >> <p:input name="data" href="#converter"/> >> </p:processor> >> </p:config> >> >> Be also sure to check in the logs that your submission in fact is >> calling /xforms-mods/results. If it is not, you will have to check >> your xforms:submission element. Also remember that a submission will >> work only if the instance is valid and if required values are not >> empty. Otherwise, an xforms-submit-error event is thrown. >> >> -Erik -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
Re: Basic output of instance doc?
|
Administrator
|
In reply to this post by Duane Gran
Duane,
The file really should be created everytime. I have just found out that the other change I was talking about earlier in this thread was made on 2005-08-30, which is after OPS 3.0 beta 2 and before OPS 3.0 beta 3. If you are using beta 3, you should be all right! -Erik Duane Gran wrote: > Erik (and others), > > I don't want to lean on the list too much, but I have a related problem > that is puzzling me. OPS doesn't reliably produce the output file > (/tmp/mods-result.xml) and I can't figure out why sometimes it works > and other times it doesn't. I've tried restarting Tomcat, but to no > avail. My form is simple with no bindings, so I don't believe there > could be any xforms-submit-error event. Can anyone suggest a reason > for why the file is created intermittently or how I might debug this? > > Duane -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
|
|
Erik,
Thanks for the suggestion. I'm running version 3.0 beta 2 and it appears that this is the latest version from the web site: http://www.orbeon.com/community/downloads Maybe I'm overlooking the download link for beta 3. Possibly it is only available in cvs? Duane On Dec 5, 2005, at 10:44 AM, Erik Bruchez wrote: > Duane, > > The file really should be created everytime. > > I have just found out that the other change I was talking about > earlier in this thread was made on 2005-08-30, which is after OPS > 3.0 beta 2 and before OPS 3.0 beta 3. If you are using beta 3, you > should be all right! > > -Erik > > Duane Gran wrote: >> Erik (and others), >> I don't want to lean on the list too much, but I have a related >> problem that is puzzling me. OPS doesn't reliably produce the >> output file (/tmp/mods-result.xml) and I can't figure out why >> sometimes it works and other times it doesn't. I've tried >> restarting Tomcat, but to no avail. My form is simple with no >> bindings, so I don't believe there could be any xforms-submit- >> error event. Can anyone suggest a reason for why the file is >> created intermittently or how I might debug this? >> Duane > > > -- > You receive this message as a subscriber of the ops- > [hidden email] mailing list. > To unsubscribe: mailto:[hidden email] > For general help: mailto:[hidden email]?subject=help > ObjectWeb mailing lists service home page: http://www.objectweb.org/ > wws -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
Re: Basic output of instance doc?
|
|
Duane,
I missed it too - until I found: http://forge.objectweb.org/project/showfiles.php?group_id=168 Beta 3 is there. Bob On Mon, 2005-12-05 at 14:03 -0500, Duane Gran wrote: > Erik, > > Thanks for the suggestion. I'm running version 3.0 beta 2 and it > appears that this is the latest version from the web site: > > http://www.orbeon.com/community/downloads > > Maybe I'm overlooking the download link for beta 3. Possibly it is > only available in cvs? > > Duane > > On Dec 5, 2005, at 10:44 AM, Erik Bruchez wrote: > > > Duane, > > > > The file really should be created everytime. > > > > I have just found out that the other change I was talking about > > earlier in this thread was made on 2005-08-30, which is after OPS > > 3.0 beta 2 and before OPS 3.0 beta 3. If you are using beta 3, you > > should be all right! > > > > -Erik > > > > Duane Gran wrote: > >> Erik (and others), > >> I don't want to lean on the list too much, but I have a related > >> problem that is puzzling me. OPS doesn't reliably produce the > >> output file (/tmp/mods-result.xml) and I can't figure out why > >> sometimes it works and other times it doesn't. I've tried > >> restarting Tomcat, but to no avail. My form is simple with no > >> bindings, so I don't believe there could be any xforms-submit- > >> error event. Can anyone suggest a reason for why the file is > >> created intermittently or how I might debug this? > >> Duane > > > > > > -- > > You receive this message as a subscriber of the ops- > > [hidden email] mailing list. > > To unsubscribe: mailto:[hidden email] > > For general help: mailto:[hidden email]?subject=help > > ObjectWeb mailing lists service home page: http://www.objectweb.org/ > > wws > > > plain text document attachment (message-footer.txt) > -- > You receive this message as a subscriber of the [hidden email] mailing list. > To unsubscribe: mailto:[hidden email] > For general help: mailto:[hidden email]?subject=help > ObjectWeb mailing lists service home page: http://www.objectweb.org/wws The Computer Guy Sequoia Group LLC 248 414-7288 248 414-7541 (fax) -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
Re: Basic output of instance doc?
Administrator
|
In reply to this post by Duane Gran
Hi Duane,
The link on the web site of out of date: a beta 3 has been released in September, and major improvements have been done since then in the "unstable builds". You can get the beta 3 from the first link below, but I would rather recommend you work with an "unstable build", which you can get from the second link below. http://forge.objectweb.org/project/showfiles.php?group_id=168 http://forge.objectweb.org/nightlybuilds/ops/ops/ Alex On 12/5/05, Duane Gran <[hidden email]> wrote: > Erik, > > Thanks for the suggestion. I'm running version 3.0 beta 2 and it > appears that this is the latest version from the web site: > > http://www.orbeon.com/community/downloads > > Maybe I'm overlooking the download link for beta 3. Possibly it is > only available in cvs? > > Duane > > On Dec 5, 2005, at 10:44 AM, Erik Bruchez wrote: > > > Duane, > > > > The file really should be created everytime. > > > > I have just found out that the other change I was talking about > > earlier in this thread was made on 2005-08-30, which is after OPS > > 3.0 beta 2 and before OPS 3.0 beta 3. If you are using beta 3, you > > should be all right! > > > > -Erik > > > > Duane Gran wrote: > >> Erik (and others), > >> I don't want to lean on the list too much, but I have a related > >> problem that is puzzling me. OPS doesn't reliably produce the > >> output file (/tmp/mods-result.xml) and I can't figure out why > >> sometimes it works and other times it doesn't. I've tried > >> restarting Tomcat, but to no avail. My form is simple with no > >> bindings, so I don't believe there could be any xforms-submit- > >> error event. Can anyone suggest a reason for why the file is > >> created intermittently or how I might debug this? > >> Duane > > > > > > -- > > You receive this message as a subscriber of the ops- > > [hidden email] mailing list. > > To unsubscribe: mailto:[hidden email] > > For general help: mailto:[hidden email]?subject=help > > ObjectWeb mailing lists service home page: http://www.objectweb.org/ > > wws > > > > > > -- > You receive this message as a subscriber of the [hidden email] mailing list. > To unsubscribe: mailto:[hidden email] > For general help: mailto:[hidden email]?subject=help > ObjectWeb mailing lists service home page: http://www.objectweb.org/wws > > > -- Blog (XML, Web apps, Open Source): http://www.orbeon.com/blog/ -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws
--
Follow Orbeon on Twitter: @orbeon Follow me on Twitter: @avernet |
Re: Basic output of instance doc?
|
Administrator
|
In reply to this post by Robert Bateman
We will release a beta 4 soon and this time we'll think about updating
the web site :). Alex On 12/5/05, Robert Bateman <[hidden email]> wrote: > Duane, > > I missed it too - until I found: > > http://forge.objectweb.org/project/showfiles.php?group_id=168 > > Beta 3 is there. > > Bob > > On Mon, 2005-12-05 at 14:03 -0500, Duane Gran wrote: > > Erik, > > > > Thanks for the suggestion. I'm running version 3.0 beta 2 and it > > appears that this is the latest version from the web site: > > > > http://www.orbeon.com/community/downloads > > > > Maybe I'm overlooking the download link for beta 3. Possibly it is > > only available in cvs? > > > > Duane > > > > On Dec 5, 2005, at 10:44 AM, Erik Bruchez wrote: > > > > > Duane, > > > > > > The file really should be created everytime. > > > > > > I have just found out that the other change I was talking about > > > earlier in this thread was made on 2005-08-30, which is after OPS > > > 3.0 beta 2 and before OPS 3.0 beta 3. If you are using beta 3, you > > > should be all right! > > > > > > -Erik > > > > > > Duane Gran wrote: > > >> Erik (and others), > > >> I don't want to lean on the list too much, but I have a related > > >> problem that is puzzling me. OPS doesn't reliably produce the > > >> output file (/tmp/mods-result.xml) and I can't figure out why > > >> sometimes it works and other times it doesn't. I've tried > > >> restarting Tomcat, but to no avail. My form is simple with no > > >> bindings, so I don't believe there could be any xforms-submit- > > >> error event. Can anyone suggest a reason for why the file is > > >> created intermittently or how I might debug this? > > >> Duane > > > > > > > > > -- > > > You receive this message as a subscriber of the ops- > > > [hidden email] mailing list. > > > To unsubscribe: mailto:[hidden email] > > > For general help: mailto:[hidden email]?subject=help > > > ObjectWeb mailing lists service home page: http://www.objectweb.org/ > > > wws > > > > > > plain text document attachment (message-footer.txt) > > -- > > You receive this message as a subscriber of the [hidden email] mailing list. > > To unsubscribe: mailto:[hidden email] > > For general help: mailto:[hidden email]?subject=help > > ObjectWeb mailing lists service home page: http://www.objectweb.org/wws > -- > Bob Bateman > The Computer Guy > Sequoia Group LLC > 248 414-7288 > 248 414-7541 (fax) > > > > > > -- > You receive this message as a subscriber of the [hidden email] mailing list. > To unsubscribe: mailto:[hidden email] > For general help: mailto:[hidden email]?subject=help > ObjectWeb mailing lists service home page: http://www.objectweb.org/wws > > > -- Blog (XML, Web apps, Open Source): http://www.orbeon.com/blog/ -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws
--
Follow Orbeon on Twitter: @orbeon Follow me on Twitter: @avernet |
|
|
In reply to this post by Alessandro Vernet
Alex,
Thank you. I'm now running the nightly release (as of 5 Dec) and unfortunately the file still isn't created. I'm running this under Tomcat 4.1.31 and I'm monitoring catalina.out for any errors, but I don't see any indication of a problem. I'm sure it is a problem in my configuration, but is there a verbose debugging mode that might reveal the source of the problem? Duane On Dec 5, 2005, at 3:34 PM, Alessandro Vernet wrote: > Hi Duane, > > The link on the web site of out of date: a beta 3 has been released in > September, and major improvements have been done since then in the > "unstable builds". You can get the beta 3 from the first link below, > but I would rather recommend you work with an "unstable build", which > you can get from the second link below. > > http://forge.objectweb.org/project/showfiles.php?group_id=168 > http://forge.objectweb.org/nightlybuilds/ops/ops/ > > Alex > > On 12/5/05, Duane Gran <[hidden email]> wrote: >> Erik, >> >> Thanks for the suggestion. I'm running version 3.0 beta 2 and it >> appears that this is the latest version from the web site: >> >> http://www.orbeon.com/community/downloads >> >> Maybe I'm overlooking the download link for beta 3. Possibly it is >> only available in cvs? >> >> Duane >> >> On Dec 5, 2005, at 10:44 AM, Erik Bruchez wrote: >> >>> Duane, >>> >>> The file really should be created everytime. >>> >>> I have just found out that the other change I was talking about >>> earlier in this thread was made on 2005-08-30, which is after OPS >>> 3.0 beta 2 and before OPS 3.0 beta 3. If you are using beta 3, you >>> should be all right! >>> >>> -Erik >>> >>> Duane Gran wrote: >>>> Erik (and others), >>>> I don't want to lean on the list too much, but I have a related >>>> problem that is puzzling me. OPS doesn't reliably produce the >>>> output file (/tmp/mods-result.xml) and I can't figure out why >>>> sometimes it works and other times it doesn't. I've tried >>>> restarting Tomcat, but to no avail. My form is simple with no >>>> bindings, so I don't believe there could be any xforms-submit- >>>> error event. Can anyone suggest a reason for why the file is >>>> created intermittently or how I might debug this? >>>> Duane >>> >>> >>> -- >>> You receive this message as a subscriber of the ops- >>> [hidden email] mailing list. >>> To unsubscribe: mailto:[hidden email] >>> For general help: mailto:[hidden email]?subject=help >>> ObjectWeb mailing lists service home page: http://www.objectweb.org/ >>> wws >> >> >> >> >> >> -- >> You receive this message as a subscriber of the ops- >> [hidden email] mailing list. >> To unsubscribe: mailto:[hidden email] >> For general help: mailto:[hidden email]?subject=help >> ObjectWeb mailing lists service home page: http:// >> www.objectweb.org/wws >> >> >> > > > -- > Blog (XML, Web apps, Open Source): http://www.orbeon.com/blog/ > > > -- > You receive this message as a subscriber of the ops- > [hidden email] mailing list. > To unsubscribe: mailto:[hidden email] > For general help: mailto:[hidden email]?subject=help > ObjectWeb mailing lists service home page: http://www.objectweb.org/ > wws -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
Re: Basic output of instance doc?
|
Administrator
|
Duane,
Is there some code that you can share with us in the mailing list and that we can run locally to reproduce the problem you are having? Alex On 12/5/05, Duane Gran <[hidden email]> wrote: > Alex, > > Thank you. I'm now running the nightly release (as of 5 Dec) and > unfortunately the file still isn't created. I'm running this under > Tomcat 4.1.31 and I'm monitoring catalina.out for any errors, but I > don't see any indication of a problem. I'm sure it is a problem in > my configuration, but is there a verbose debugging mode that might > reveal the source of the problem? > > Duane > > On Dec 5, 2005, at 3:34 PM, Alessandro Vernet wrote: > > > Hi Duane, > > > > The link on the web site of out of date: a beta 3 has been released in > > September, and major improvements have been done since then in the > > "unstable builds". You can get the beta 3 from the first link below, > > but I would rather recommend you work with an "unstable build", which > > you can get from the second link below. > > > > http://forge.objectweb.org/project/showfiles.php?group_id=168 > > http://forge.objectweb.org/nightlybuilds/ops/ops/ > > > > Alex > > > > On 12/5/05, Duane Gran <[hidden email]> wrote: > >> Erik, > >> > >> Thanks for the suggestion. I'm running version 3.0 beta 2 and it > >> appears that this is the latest version from the web site: > >> > >> http://www.orbeon.com/community/downloads > >> > >> Maybe I'm overlooking the download link for beta 3. Possibly it is > >> only available in cvs? > >> > >> Duane > >> > >> On Dec 5, 2005, at 10:44 AM, Erik Bruchez wrote: > >> > >>> Duane, > >>> > >>> The file really should be created everytime. > >>> > >>> I have just found out that the other change I was talking about > >>> earlier in this thread was made on 2005-08-30, which is after OPS > >>> 3.0 beta 2 and before OPS 3.0 beta 3. If you are using beta 3, you > >>> should be all right! > >>> > >>> -Erik > >>> > >>> Duane Gran wrote: > >>>> Erik (and others), > >>>> I don't want to lean on the list too much, but I have a related > >>>> problem that is puzzling me. OPS doesn't reliably produce the > >>>> output file (/tmp/mods-result.xml) and I can't figure out why > >>>> sometimes it works and other times it doesn't. I've tried > >>>> restarting Tomcat, but to no avail. My form is simple with no > >>>> bindings, so I don't believe there could be any xforms-submit- > >>>> error event. Can anyone suggest a reason for why the file is > >>>> created intermittently or how I might debug this? > >>>> Duane > >>> > >>> > >>> -- > >>> You receive this message as a subscriber of the ops- > >>> [hidden email] mailing list. > >>> To unsubscribe: mailto:[hidden email] > >>> For general help: mailto:[hidden email]?subject=help > >>> ObjectWeb mailing lists service home page: http://www.objectweb.org/ > >>> wws > >> > >> > >> > >> > >> > >> -- > >> You receive this message as a subscriber of the ops- > >> [hidden email] mailing list. > >> To unsubscribe: mailto:[hidden email] > >> For general help: mailto:[hidden email]?subject=help > >> ObjectWeb mailing lists service home page: http:// > >> www.objectweb.org/wws > >> > >> > >> > > > > > > -- > > Blog (XML, Web apps, Open Source): http://www.orbeon.com/blog/ > > > > > > -- > > You receive this message as a subscriber of the ops- > > [hidden email] mailing list. > > To unsubscribe: mailto:[hidden email] > > For general help: mailto:[hidden email]?subject=help > > ObjectWeb mailing lists service home page: http://www.objectweb.org/ > > wws > > > > > > -- > You receive this message as a subscriber of the [hidden email] mailing list. > To unsubscribe: mailto:[hidden email] > For general help: mailto:[hidden email]?subject=help > ObjectWeb mailing lists service home page: http://www.objectweb.org/wws > > > -- Blog (XML, Web apps, Open Source): http://www.orbeon.com/blog/ -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws
--
Follow Orbeon on Twitter: @orbeon Follow me on Twitter: @avernet |
Re: Basic output of instance doc?
|
Administrator
|
In reply to this post by Duane Gran
> Thank you. I'm now running the nightly release (as of 5 Dec) and
> unfortunately the file still isn't created. I'm running this under > Tomcat 4.1.31 and I'm monitoring catalina.out for any errors, but I > don't see any indication of a problem. I'm sure it is a problem in > my configuration, but is there a verbose debugging mode that might > reveal the source of the problem? The usual strategy in such a case is to use "debug" attributes on processors inputs and outputs to get some visibility. -Erik -- You receive this message as a subscriber of the [hidden email] mailing list. To unsubscribe: mailto:[hidden email] For general help: mailto:[hidden email]?subject=help ObjectWeb mailing lists service home page: http://www.objectweb.org/wws |
«
Return to Orbeon Forms community mailing list
|
1 view|%1 views
| Free forum by Nabble | Edit this page |