Service.Actions appear broken in nightly

> Hey All;
>
>
>
> I’m really looking forward to some of the features in the next release, and
> have begun doing some initial testing with the nightly build. I did run into
> a show stopper issue that prevents me from doing much further testing.
>
>
>
>
>
> In form builder, the dialog for setting up new actions appears to be broken.
>
>
>
>
>
> Steps to reproduce the issue:
>
> 1.       Install the latest nightly PE (Mine was dated May 1, 2012).
>
> 2.       Install my license file.
>
> 3.       Goto form builder
>
> 4.       Start a new form.
>
> 5.       Add a bunch of controls to the form.
>
> 6.       In the “Services and Actions” section, Add a HTTP service. (I used
> ‘test’ to verify the action is working just fine.
>
> 7.       Now in “Actions”, hit  “Add” to add a new action.
>
> 8.       Fill in the action name, select the ‘react to” (in my case, I used
> ‘form load”)
>
> 9.       Select the service previously selected.
>
> 10.   Two problems show up (see attached screen shot)
>
> a.       There is an additional unlabeled dropdown box on the screen with no
> options in it.
>
> b.      All the ‘value/parameter’ sections are empty. Normally at this
> point, I would select the control to populate with the response from the
> service call.
>
>
>
> I realize this is a nightly build and things my be in transition, or you may
> already be aware of the issue. I’m sending this email, just in case you were
> not already aware of this.
>
>
>
> I’m putting my testing of the new release on hold until this issue is
> resolved. But would be glad to continue deeper testing with any new nightly
> releases, once this issue is resolved.
>
>
>
>
>
> Really looking forward to the enhancements in the new release.  You guys
> rock!
>
>
>
>
>
> Many thanks,
>
>
>
>
>
> Andy G
>
>
>
> --
> You receive this message as a subscriber of the [hidden email] mailing
> list.
> To unsubscribe: mailto:[hidden email]
> For general help: mailto:[hidden email]?subject=help
> OW2 mailing lists service home page: http://www.ow2.org/wws
>

> Hey All;
>
>
>
> I'm really looking forward to some of the features in the next
> release, and have begun doing some initial testing with the nightly
> build. I did run into a show stopper issue that prevents me from doing much further testing.
>
>
>
>
>
> In form builder, the dialog for setting up new actions appears to be broken.
>
>
>
>
>
> Steps to reproduce the issue:
>
> 1.       Install the latest nightly PE (Mine was dated May 1, 2012).
>
> 2.       Install my license file.
>
> 3.       Goto form builder
>
> 4.       Start a new form.
>
> 5.       Add a bunch of controls to the form.
>
> 6.       In the "Services and Actions" section, Add a HTTP service. (I
> used 'test' to verify the action is working just fine.
>
> 7.       Now in "Actions", hit  "Add" to add a new action.
>
> 8.       Fill in the action name, select the 'react to" (in my case, I
> used 'form load")
>
> 9.       Select the service previously selected.
>
> 10.   Two problems show up (see attached screen shot)
>
> a.       There is an additional unlabeled dropdown box on the screen
> with no options in it.
>
> b.      All the 'value/parameter' sections are empty. Normally at this
> point, I would select the control to populate with the response from
> the service call.
>
>
>
> I realize this is a nightly build and things my be in transition, or
> you may already be aware of the issue. I'm sending this email, just in
> case you were not already aware of this.
>
>
>
> I'm putting my testing of the new release on hold until this issue is
> resolved. But would be glad to continue deeper testing with any new
> nightly releases, once this issue is resolved.
>
>
>
>
>
> Really looking forward to the enhancements in the new release.  You
> guys rock!
>
>
>
>
>
> Many thanks,
>
>
>
>
>
> Andy G
>
>
>
> --
> You receive this message as a subscriber of the [hidden email]
> mailing list.
> To unsubscribe: mailto:[hidden email]
> For general help: mailto:[hidden email]?subject=help
> OW2 mailing lists service home page: http://www.ow2.org/wws
>

> Thanks Erik!
>
> -----Original Message-----
> From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
> Sent: Monday, May 07, 2012 11:39 PM
> To: [hidden email]
> Subject: [ops-users] Re: Service.Actions appear broken in nightly
>
> Andy,
>
> Thanks the detailed steps and the kind comments: we definitely want to fix this! I have entered an issue:
>
> https://github.com/orbeon/orbeon-forms/issues/190
>
> -Erik
>
> On Thu, May 3, 2012 at 9:34 AM, Andy Goar <[hidden email]> wrote:
>> Hey All;
>>
>>
>>
>> I'm really looking forward to some of the features in the next
>> release, and have begun doing some initial testing with the nightly
>> build. I did run into a show stopper issue that prevents me from doing much further testing.
>>
>>
>>
>>
>>
>> In form builder, the dialog for setting up new actions appears to be broken.
>>
>>
>>
>>
>>
>> Steps to reproduce the issue:
>>
>> 1.       Install the latest nightly PE (Mine was dated May 1, 2012).
>>
>> 2.       Install my license file.
>>
>> 3.       Goto form builder
>>
>> 4.       Start a new form.
>>
>> 5.       Add a bunch of controls to the form.
>>
>> 6.       In the "Services and Actions" section, Add a HTTP service. (I
>> used 'test' to verify the action is working just fine.
>>
>> 7.       Now in "Actions", hit  "Add" to add a new action.
>>
>> 8.       Fill in the action name, select the 'react to" (in my case, I
>> used 'form load")
>>
>> 9.       Select the service previously selected.
>>
>> 10.   Two problems show up (see attached screen shot)
>>
>> a.       There is an additional unlabeled dropdown box on the screen
>> with no options in it.
>>
>> b.      All the 'value/parameter' sections are empty. Normally at this
>> point, I would select the control to populate with the response from
>> the service call.
>>
>>
>>
>> I realize this is a nightly build and things my be in transition, or
>> you may already be aware of the issue. I'm sending this email, just in
>> case you were not already aware of this.
>>
>>
>>
>> I'm putting my testing of the new release on hold until this issue is
>> resolved. But would be glad to continue deeper testing with any new
>> nightly releases, once this issue is resolved.
>>
>>
>>
>>
>>
>> Really looking forward to the enhancements in the new release.  You
>> guys rock!
>>
>>
>>
>>
>>
>> Many thanks,
>>
>>
>>
>>
>>
>> Andy G
>>
>>
>>
>> --
>> You receive this message as a subscriber of the [hidden email]
>> mailing list.
>> To unsubscribe: mailto:[hidden email]
>> For general help: mailto:[hidden email]?subject=help
>> OW2 mailing lists service home page: http://www.ow2.org/wws
>>
>
> --
> You receive this message as a subscriber of the [hidden email] mailing list.
> To unsubscribe: mailto:[hidden email]
> For general help: mailto:[hidden email]?subject=help
> OW2 mailing lists service home page: http://www.ow2.org/wws

> Whilst on the subject, I have noticed even in early versions (3.7) that the service dialog boxes do not have scroll capabilities. This is fine for a few source and destination entries, however, if you have more than the screen height, you run into problems. What about adding scroll capabilities to the dialog box?
>
> Regards
>
> Jeff
>
>
> On 08/05/2012, at 10:33 PM, Andy Goar wrote:
>
>> Thanks Erik!
>>
>> -----Original Message-----
>> From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
>> Sent: Monday, May 07, 2012 11:39 PM
>> To: [hidden email]
>> Subject: [ops-users] Re: Service.Actions appear broken in nightly
>>
>> Andy,
>>
>> Thanks the detailed steps and the kind comments: we definitely want to fix this! I have entered an issue:
>>
>> https://github.com/orbeon/orbeon-forms/issues/190
>>
>> -Erik
>>
>> On Thu, May 3, 2012 at 9:34 AM, Andy Goar <[hidden email]> wrote:
>>> Hey All;
>>>
>>>
>>>
>>> I'm really looking forward to some of the features in the next
>>> release, and have begun doing some initial testing with the nightly
>>> build. I did run into a show stopper issue that prevents me from doing much further testing.
>>>
>>>
>>>
>>>
>>>
>>> In form builder, the dialog for setting up new actions appears to be broken.
>>>
>>>
>>>
>>>
>>>
>>> Steps to reproduce the issue:
>>>
>>> 1.       Install the latest nightly PE (Mine was dated May 1, 2012).
>>>
>>> 2.       Install my license file.
>>>
>>> 3.       Goto form builder
>>>
>>> 4.       Start a new form.
>>>
>>> 5.       Add a bunch of controls to the form.
>>>
>>> 6.       In the "Services and Actions" section, Add a HTTP service. (I
>>> used 'test' to verify the action is working just fine.
>>>
>>> 7.       Now in "Actions", hit  "Add" to add a new action.
>>>
>>> 8.       Fill in the action name, select the 'react to" (in my case, I
>>> used 'form load")
>>>
>>> 9.       Select the service previously selected.
>>>
>>> 10.   Two problems show up (see attached screen shot)
>>>
>>> a.       There is an additional unlabeled dropdown box on the screen
>>> with no options in it.
>>>
>>> b.      All the 'value/parameter' sections are empty. Normally at this
>>> point, I would select the control to populate with the response from
>>> the service call.
>>>
>>>
>>>
>>> I realize this is a nightly build and things my be in transition, or
>>> you may already be aware of the issue. I'm sending this email, just in
>>> case you were not already aware of this.
>>>
>>>
>>>
>>> I'm putting my testing of the new release on hold until this issue is
>>> resolved. But would be glad to continue deeper testing with any new
>>> nightly releases, once this issue is resolved.
>>>
>>>
>>>
>>>
>>>
>>> Really looking forward to the enhancements in the new release.  You
>>> guys rock!
>>>
>>>
>>>
>>>
>>>
>>> Many thanks,
>>>
>>>
>>>
>>>
>>>
>>> Andy G
>>>
>>>
>>>
>>> --
>>> You receive this message as a subscriber of the [hidden email]
>>> mailing list.
>>> To unsubscribe: mailto:[hidden email]
>>> For general help: mailto:[hidden email]?subject=help
>>> OW2 mailing lists service home page: http://www.ow2.org/wws
>>>
>>
>> --
>> You receive this message as a subscriber of the [hidden email] mailing list.
>> To unsubscribe: mailto:[hidden email]
>> For general help: mailto:[hidden email]?subject=help
>> OW2 mailing lists service home page: http://www.ow2.org/wws
>
>
>
> --
> You receive this message as a subscriber of the [hidden email] mailing list.
> To unsubscribe: mailto:[hidden email]
> For general help: mailto:[hidden email]?subject=help
> OW2 mailing lists service home page: http://www.ow2.org/wws
>

> Jeff,
>
> That sounds reasonable and we've hit this issue in the past as well! I
> added an RFE. Hopefully we'll manage to do this for the release:
>
> https://github.com/orbeon/orbeon-forms/issues/193
>
> -Erik
>
> On Tue, May 8, 2012 at 5:14 PM, J Lambourne <[hidden email]> wrote:
>> Whilst on the subject, I have noticed even in early versions (3.7) that the service dialog boxes do not have scroll capabilities. This is fine for a few source and destination entries, however, if you have more than the screen height, you run into problems. What about adding scroll capabilities to the dialog box?
>>
>> Regards
>>
>> Jeff
>>
>>
>> On 08/05/2012, at 10:33 PM, Andy Goar wrote:
>>
>>> Thanks Erik!
>>>
>>> -----Original Message-----
>>> From: [hidden email] [mailto:[hidden email]] On Behalf Of Erik Bruchez
>>> Sent: Monday, May 07, 2012 11:39 PM
>>> To: [hidden email]
>>> Subject: [ops-users] Re: Service.Actions appear broken in nightly
>>>
>>> Andy,
>>>
>>> Thanks the detailed steps and the kind comments: we definitely want to fix this! I have entered an issue:
>>>
>>> https://github.com/orbeon/orbeon-forms/issues/190
>>>
>>> -Erik
>>>
>>> On Thu, May 3, 2012 at 9:34 AM, Andy Goar <[hidden email]> wrote:
>>>> Hey All;
>>>>
>>>>
>>>>
>>>> I'm really looking forward to some of the features in the next
>>>> release, and have begun doing some initial testing with the nightly
>>>> build. I did run into a show stopper issue that prevents me from doing much further testing.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> In form builder, the dialog for setting up new actions appears to be broken.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Steps to reproduce the issue:
>>>>
>>>> 1.       Install the latest nightly PE (Mine was dated May 1, 2012).
>>>>
>>>> 2.       Install my license file.
>>>>
>>>> 3.       Goto form builder
>>>>
>>>> 4.       Start a new form.
>>>>
>>>> 5.       Add a bunch of controls to the form.
>>>>
>>>> 6.       In the "Services and Actions" section, Add a HTTP service. (I
>>>> used 'test' to verify the action is working just fine.
>>>>
>>>> 7.       Now in "Actions", hit  "Add" to add a new action.
>>>>
>>>> 8.       Fill in the action name, select the 'react to" (in my case, I
>>>> used 'form load")
>>>>
>>>> 9.       Select the service previously selected.
>>>>
>>>> 10.   Two problems show up (see attached screen shot)
>>>>
>>>> a.       There is an additional unlabeled dropdown box on the screen
>>>> with no options in it.
>>>>
>>>> b.      All the 'value/parameter' sections are empty. Normally at this
>>>> point, I would select the control to populate with the response from
>>>> the service call.
>>>>
>>>>
>>>>
>>>> I realize this is a nightly build and things my be in transition, or
>>>> you may already be aware of the issue. I'm sending this email, just in
>>>> case you were not already aware of this.
>>>>
>>>>
>>>>
>>>> I'm putting my testing of the new release on hold until this issue is
>>>> resolved. But would be glad to continue deeper testing with any new
>>>> nightly releases, once this issue is resolved.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Really looking forward to the enhancements in the new release.  You
>>>> guys rock!
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Many thanks,
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Andy G
>>>>
>>>>
>>>>
>>>> --
>>>> You receive this message as a subscriber of the [hidden email]
>>>> mailing list.
>>>> To unsubscribe: mailto:[hidden email]
>>>> For general help: mailto:[hidden email]?subject=help
>>>> OW2 mailing lists service home page: http://www.ow2.org/wws
>>>>
>>>
>>> --
>>> You receive this message as a subscriber of the [hidden email] mailing list.
>>> To unsubscribe: mailto:[hidden email]
>>> For general help: mailto:[hidden email]?subject=help
>>> OW2 mailing lists service home page: http://www.ow2.org/wws
>>
>>
>>
>> --
>> You receive this message as a subscriber of the [hidden email] mailing list.
>> To unsubscribe: mailto:[hidden email]
>> For general help: mailto:[hidden email]?subject=help
>> OW2 mailing lists service home page: http://www.ow2.org/wws
>>

> Jeff,
>
> That sounds reasonable and we've hit this issue in the past as well! I
> added an RFE. Hopefully we'll manage to do this for the release:
>
> https://github.com/orbeon/orbeon-forms/issues/193
>
> -Erik
>
> On Tue, May 8, 2012 at 5:14 PM, J Lambourne <[hidden email]> wrote:
>> Whilst on the subject, I have noticed even in early versions (3.7) that the service dialog boxes do not have scroll capabilities. This is fine for a few source and destination entries, however, if you have more than the screen height, you run into problems. What about adding scroll capabilities to the dialog box?
>>
>> Regards
>>
>> Jeff
>>
>>
>> On 08/05/2012, at 10:33 PM, Andy Goar wrote:
>>
>>> Thanks Erik!
>>>
>>> -----Original Message-----
>>> From: [hidden email] [mailto:[hidden email]] On Behalf Of
>>> Erik Bruchez
>>> Sent: Monday, May 07, 2012 11:39 PM
>>> To: [hidden email]
>>> Subject: [ops-users] Re: Service.Actions appear broken in nightly
>>>
>>> Andy,
>>>
>>> Thanks the detailed steps and the kind comments: we definitely want to fix this! I have entered an issue:
>>>
>>> https://github.com/orbeon/orbeon-forms/issues/190
>>>
>>> -Erik
>>>
>>> On Thu, May 3, 2012 at 9:34 AM, Andy Goar <[hidden email]> wrote:
>>>> Hey All;
>>>>
>>>>
>>>>
>>>> I'm really looking forward to some of the features in the next
>>>> release, and have begun doing some initial testing with the nightly
>>>> build. I did run into a show stopper issue that prevents me from doing much further testing.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> In form builder, the dialog for setting up new actions appears to be broken.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Steps to reproduce the issue:
>>>>
>>>> 1.       Install the latest nightly PE (Mine was dated May 1, 2012).
>>>>
>>>> 2.       Install my license file.
>>>>
>>>> 3.       Goto form builder
>>>>
>>>> 4.       Start a new form.
>>>>
>>>> 5.       Add a bunch of controls to the form.
>>>>
>>>> 6.       In the "Services and Actions" section, Add a HTTP service.
>>>> (I used 'test' to verify the action is working just fine.
>>>>
>>>> 7.       Now in "Actions", hit  "Add" to add a new action.
>>>>
>>>> 8.       Fill in the action name, select the 'react to" (in my
>>>> case, I used 'form load")
>>>>
>>>> 9.       Select the service previously selected.
>>>>
>>>> 10.   Two problems show up (see attached screen shot)
>>>>
>>>> a.       There is an additional unlabeled dropdown box on the
>>>> screen with no options in it.
>>>>
>>>> b.      All the 'value/parameter' sections are empty. Normally at
>>>> this point, I would select the control to populate with the
>>>> response from the service call.
>>>>
>>>>
>>>>
>>>> I realize this is a nightly build and things my be in transition,
>>>> or you may already be aware of the issue. I'm sending this email,
>>>> just in case you were not already aware of this.
>>>>
>>>>
>>>>
>>>> I'm putting my testing of the new release on hold until this issue
>>>> is resolved. But would be glad to continue deeper testing with any
>>>> new nightly releases, once this issue is resolved.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Really looking forward to the enhancements in the new release.  You
>>>> guys rock!
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Many thanks,
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Andy G
>>>>
>>>>
>>>>
>>>> --
>>>> You receive this message as a subscriber of the [hidden email]
>>>> mailing list.
>>>> To unsubscribe: mailto:[hidden email]
>>>> For general help: mailto:[hidden email]?subject=help
>>>> OW2 mailing lists service home page: http://www.ow2.org/wws
>>>>
>>>
>>> --
>>> You receive this message as a subscriber of the [hidden email] mailing list.
>>> To unsubscribe: mailto:[hidden email]
>>> For general help: mailto:[hidden email]?subject=help
>>> OW2 mailing lists service home page: http://www.ow2.org/wws
>>
>>
>>
>> --
>> You receive this message as a subscriber of the [hidden email] mailing list.
>> To unsubscribe: mailto:[hidden email]
>> For general help: mailto:[hidden email]?subject=help
>> OW2 mailing lists service home page: http://www.ow2.org/wws
>>